M360-Manager Plug-in

When you're doing Surround sound design or mixing, you need flawless satellite and subwoofer monitoring. For 5.1 studio calibration and bass management, the M360° Surround Manager is indispensable for achieving the perfect balance and spread.

Features :

• ITU standard Mixdown matrices
• 10 Mixdown formats
• Subwoofer feed control
• Speaker angle and center level adjustment controls
• LFE gain offset adjustment
• 2-band bass-split crossover
• Send Angles for connectivity with other panners and imagers
• Derives Quad, LCR, Stereo and Mono mixes from Surround
• Up to 24bit 192kHz resolution
• 5.1/5.0 Surround Components
• Supports TDM, RTAS, Audio Suite, VST
• PC and Mac compatible

Controls

• On/Off switch
• Angle +180° to -180°
• Pan Pair-wise or Triple-wise
Width
• On/Off switch
• Ratio .0 to 4.0
• Pan Balanced, Front-stage, Front/Rear-stage, Focus and Mono Divergence
Center Alignment -Aligned, +Aligned, -6dB, -4.5dB, -3dB, 0dB, +3dB, +4.5dB or +6dB

Surrounds Alignment -6dB, -3dB, 0dB, +3dB or +6dB

LR Angle Alignment +/-20° to +/-50°

LsRs Angle Alignment +/-90° to +/-150°

Circle Graphic Display Shows the final spatial image

Send Speaker Angle Sends Angle information to open S360 panners and imagers

Solo/Mute/Phase per channel including LFE and SUB

Gain -24dB to 0dB per channel including LFE and SUB

Delay 0ms to 15ms per channel

Send to Sub -inf. to 0dB per channel

Get LFE -inf. to 0dB per channel

High Pass On/Off per channel

Low Pass On/Off for Sub only

Gain/Delay/Send-Sub/Get-LFE/Filter Links Global controls for all channels' Gain, Delay, Send to Sub, and Get LFE parameters

LFE Adjust -10dB, 0dB or +10dB

Bass Split Section
• Low Pass Filter Frequency 25Hz to 150Hz
• Low Pass Filter Slope dB/Oct, 12dB/Oct, 18dB/Oct and 24dB/Oct
• High Pass Filter Frequency 25Hz to 150Hz
• High Pass Filter Slope 6dB/Oct, 12dB/Oct, 18dB/Oct and 24dB/Oct
Output Meters -60dB to 0dB with peak hold and clip indicators per channel